Volvo 850/S70/V70/C70 Suspension

Aluminium wheel spacers: 10mm. each

Suitable for : 850/S70/V70/C70 - S60/S80/XC70/V70

Aluminium wheel spacers 10mm set of 2 (2 sets required per car). 2 x 10mm, total widening 20mm. For 5 stud wheels.

Aluminium wheel spacers: 15mm. each.

Suitable for : 850/S70/V70/C70 - S60/S80/XC70/V70

Aluminium wheel spacers 15mm set of 2 (2 sets required per car). 2 x 15mm, total widening 30mm. For 5 stud wheels.

Aluminium wheel spacers: 5mm. thick each.

Suitable for : 850/S70/V70/C70 - S60/S80/XC70/V70

Aluminium wheel spacers 5mm set of 2 (2 sets required per car). 2 x 5mm, total widening 10mm. For 5 stud wheels.

Bilstein front uprated struts.

Suitable for : 850/S70/V70/C70

Bilstein sport front struts. These are an advisable addition when fitting lowered and uprated springs as they are valved to better control higher spring rates.

Bilstein rear uprated dampers

Suitable for : 850/S70/V70/C70

Bilstein sport non adjustable uprated rear dampers. These are an advisable addition when fitting lowered and uprated springs as they are valved to better control higher spring rates.

Read more

Camber adjustment bolts.

Suitable for : 850/S70/V70/C70

A pair of specially machined bolts with nuts and locking tabs which fit into the top holes of the front struts that secure them to the hub assemblies and enable the adding of up to 2.5 degrees of negative camber to the front suspension.

Eibach uprated and lowering springs, front only

Suitable for : 850/S70/V70/C70

Front springs only for those wishing to lower and uprate the front suspension, but retain the original rear self levelling suspension when fitted of 850 saloons and estates plus S70,V70 and C70 earlier vehicles. These springs can be mated with a heavier duty rear anti roll bar, which combination will further improved vehicle roll stiffness, steering inputs and handling; again still retaining the self levelling function of the original rear dampers. In either case the fitting of the front lowered springs only will give the vehicle a slight 'nose down' attitude.

Read more

Eibach uprated and lowering springs. 850 saloon and S70.

Suitable for : 850/S70/V70/C70

Pro-Kit sports springs. Set of 4 lowered and uprated springs of the highest quality: lowers cars, not estates by 30mm from factory standard ride heights giving improved road holding and cornering. Please note different kit required for 850 estates and V70 P1.

Read more

Eibach uprated and lowering springs. C70 pre '05.

Suitable for : 850/S70/V70/C70

Pro-Kit sports springs. Set of 4 lowered and uprated springs of the highest quality: lowers the earlier pre '05 C70 by 30mm from factory standard ride heights and improves road holding and cornering.

Eibach uprated and lowering springs: 850 estate and V70 P1.

Suitable for : 850/S70/V70/C70

Pro-Kit sports springs. Set of 4 lowered and uprated springs of the highest quality: lowers estates, not cars by 30mm from factory standard ride heights giving improved road holding and cornering. Please note different kit required for 850 cars and S70's.

Front suspension camber adjustment bolt kit.

Suitable for : 850/S70/V70/C70

This pair of bolts replace the standard upper bolts that secure the front suspension struts to the hubs. By adjustment you can gain up to 1.75 degrees of negative camber from standard or otherwise non adjustable aftermarket struts.

Fully adjustable suspension package

Suitable for : 850/S70/V70/C70

Fully adjustable performance suspension package, with hand built front struts with adjustable ride height, 24 point damper setting and camber adjustment of up to 4 degrees, 65mm. front springs wound to locate into the standard top mounts. 24 point adjustable rear dampers and uprated and lowered rear springs. We suggest front spring rates of 350lb and 280lb rear springs, however we can supply other spring rates to order.

IPD uprated front and rear anti roll bar kit.

Suitable for : 850/S70/V70/C70

This kit comprises of heavier duty front and rear anti roll bars and all neccessary fittings. It will reduce body roll in cornering and improve steering response and handling. As it does not lower the vehicle it has no noticeable effect on the negotiation of speed bumps and humps.

IPD uprated rear anti roll bar.

Suitable for : 850/S70/V70/C70

Uprated rear anti roll bar which will improve handling and response to steering inputs by reducing understeer. Complete with all fittings and bushings. This bar will form a usefull suspension upgrade when combined with just the front uprated and lowered Eibach springs on a vehicle fitted with rear self levelling suspension, although that combination will give the vehicle a slight 'nose down' attitude, whilst reducing body roll and helping to improve handling.

Long wheel bolts x 10.

Suitable for : 850/S70/V70/C70

Extra long wheel bolts for use with spacers availables in sets of 10. Spec: taper head, M12 x 1.75, 45mm shaft.

Polyurethane front lower suspension bushes

Suitable for : 850/S70/V70/C70

Polyurethane bushes for the lower front wishbones: giving superior of control fore and aft movement of suspension under acceleration and heavy braking: